JamesHardie St-Laurent Cedarmill Lap Siding
Non-returnable
$32.33 - $50.20
JamesHardie St-Laurent Cedarmill Lap Siding is a fibercement siding.
Colours shown for illustration only - please see product samples for actual colour. Additional colous available via special order, see sample box or website for details. St-Laurent Siding and Trim is manufactured using a James Hardie substrate and finished in a dual-tone finish.
HardiePlank® lap siding can be installed over braced wood or steel studs spaced a maximum of 610mm (24") o.c. or directly to minimum 11.1mm (7/16") thick OSB sheathing. Irregularities in framing and sheathing can mirror through the finished application.
HardiePlank lap siding can also be installed over furring strips (in accordance with local building code requirements).
HardiePlank lap siding can also be installed over foam insulation/sheathing up to 25mm (1") thick. When using foam insulation/sheathing, avoid over-driving nails (fasteners), which can result in dimpling of the siding due to the compressible nature of the foam insulation/sheathing. Extra caution is necessary if power-driven nails (fasteners) are used for attaching siding over foam insulation/sheathing.
When installing a water-resistive barrier is required that must be appropriately installed with penetration and junction flashing.
Color
Width
Length
Choose Quantity
Product Details
Specifications
General fastening requirements.
Fasteners must be corrosion resistant, galvanized, or stainless steel.
Electro-galvanized are acceptable but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails. James Hardie is not responsible for the corrosion resistance of fasteners. Stainless steel fasteners are recommended when installing James Hardie® products near the ocean, large bodies of water, or in very humid climates
James Hardie products can be hand nailed or fastened with a pneumatic tool. Pneumatic fastening is highly recommended. Set air pressure so that the fastener is driven snug with the surface of the siding. A flush mount attachment on the pneumatic tool is recommended. This will help control the depth the nail is driven.
30 years on the product
15 years on the finish
ST-LAURENT
- Width6-1/4" | 8-1/4"
- Covering widt/Exposure5" | 7"
- Thickness5/16"
- Length12'
- Sq.ft per package20 sq.f. | 28 sq.f.
- Pieces per pack4
- Colors25 Standard Colors + Custom Colors
